Remote Sensing of Saturn's Bow Shock: Technique
It is an established fact that energetic electrons travelling through a plasma will cause the thermal electrons to oscillate about the ions in a manner that leads to electrostatic fluctuations that are called Langmuir waves. When the interplanetary magnetic field, the IMF, contacts the bow shock so as to be tangential to the surface of the shock, a beam of electrons is released which stream sunward. These energetic electrons excite Langmuir waves, which can be observed by a spacecraft in the upstream region if it is in the right position to observe that same field line. The Voyager spacecraft were not equipped to measure the energetic electrons, but they are equipped to detect Langmuir waves. So there are times when the spacecraft are approaching and leaving Saturn when Langmuir waves of the type described above are seen. We know that at this time the IMF, that is also observed by the spacecraft, is attached to the shock in a tangential manner. The way we perform this analysis is to first examine measurements of Langmuir waves recorded by the PWS experiment on the Voyager spacecraft, identify those times with signals corresponding to tangential connection of the field lines at the shock surface, and then use that assumption together with the observed IMF direction to determine the shape and/or location of the shock. The figure to the left demonstrates the concept. The parabolic form represents the shock surface being mapped. The straight line represents the IMF from the spacecraft to the shock surface where it contacts the shock as a tangent line. The solar wind flows from the left and toward the planet in the +x direction. By assuming either the standoff distance from the shock nose to the planet, or the width of the shock, the other parameter can be determined on an event-by-event basis. By selecting periods of similar solar wind conditions, the shock surface can be mapped. By selecting reasonable choices for either the shock width or the shock standoff distance, the movement of the shock in response to changing solar wind conditions can be determined. The parabolic shock surface and the straight line of the measured IMF can be written as: where The solution to this problem can be written as: where the width of the shockc is assumed and the standoff
distance is computed. The expression can be inverted to obtain
c in terms of d.
The point on the parabolic shock surface where the IMF intersects (tangents) the parabola is given by: At this point, the single-point analysis is completed and the answer is obtained. All that remains is to apply the theory to the data. Before doing that, we derive an extension of the theory that describes the triangulation of the shock surface from two observations. For a more detailed description of the 1-point analysis, you may access an MS Word document called Tangency of Line to Parabola. A more complete analysis can be performed by triangulation from two locations. Events with similar solar wind conditions must be chosen so that the possible movement of the shock between the two events is minimized. The figure to the right illustrates this scenario. The spacecraft location for the two events is presumed to be different, but the key feature is that the IMF direction changes between the two events. By using two events to obtain a single solution, both the standoff distance and the width of the shock can be determined independently. The two-point analysis can be described according to the following expressions. The 3-dimensional parabolic surface is unchanged, but now two lines with independent slopes and intercept points are defined according to:
Now, the two spacecraft locations are given by the variables
(
Although complicated, the solution to this problem (finding the
variables
where the above solution for The resulting two tangent points for the straight lines that intercept the parabola are then given by:
Clearly, the expressions are greatly complicated by the new
analysis, but we have gained the freedom to determine both
For a more detailed description of the 1-point analysis, you may access an MS Word document called Tangency of Line to Parabola (Problem 2). |